← Research & Perspectives

Space Engineering
News.

Following developments in on-orbit manufacturing, assembly and the infrastructure of future space missions.

A growing selection of interesting articles, with concise summaries, engineering context and direct links to the publishers. Explore the reporting and the research behind each story.

Explore the Stories ↓

2026 News & Research

Robotic Assembly · Orbital Infrastructure

ASTRA Demonstrates Robotic Truss Assembly in Orbit

ScienceAlert:

A small assembly demonstration offers a practical step towards structures built beyond the limits of a rocket fairing.

Caltech reports that its DARPA-funded ASTRA experiment assembled a new truss bay in orbit, extending two bays carried from Earth. The demonstration forms part of the NOM4D programme.

What Was Demonstrated?

The robot joined prepared components in space. The planned full reflector was not completed. Ground engineers sent commands, reviewed imagery and helped resolve problems during operations.

Why It Matters

Assembly from compactly stowed parts could enable larger orbital structures. The engineering challenge includes reliable joints, component handling and verification in the space environment. This demonstration concerns assembly of existing parts, rather than manufacture of those parts from raw material.

Reporting: David Nield, ScienceAlert · Original report: Kimm Fesenmaier, Caltech, 5 November 2026.

Explore the On Orbit Manufacturing Research Library ↗

Additive Manufacturing · Flight Demonstration

Replicator 2 Prints a Boom in Open Space

ESA:

ESA reports that Orbital Matter’s Replicator 2 printed a 32.5 cm polymer boom outside a spacecraft’s controlled interior. As it extended, the boom also pushed out a stowed solar array.

What the Update Covers

The process used a light-cured liquid resin and operated through daylight and night conditions. This is a small-scale orbital demonstration; durability and scaling to larger structures remain development questions.

Engineering Context

Combining fabrication with deployment could change how designers package structures for launch. Long-term performance will matter as much as the ability to print a component.

Back to the Story List ↑

Industry Review · Technology Maturity

NASA Maps the 2026 ISAM Landscape

NASA:

NASA’s 2026 ISAM State of Play brings together developments in servicing, assembly and manufacturing across 11 functional areas, including robotic manipulation, refuelling and structural assembly.

What the Update Covers

NASA’s accompanying article explains that entries require physical hardware, either ground prototypes or flight demonstrations. Inclusion therefore does not mean every technology has already operated in space.

Engineering Context

For early mission planning, the review is a useful starting point for comparing capabilities and identifying developers. Individual technologies still need assessment against a mission’s requirements.

Back to the Story List ↑

Semiconductors · Ground Development

Space Forge Builds the Ground Side of Space Manufacturing

Space Forge:

Space Forge describes its first year of terrestrial semiconductor manufacturing and the opening of its National Microgravity Research Centre at Swansea University’s semiconductor manufacturing centre.

What the Update Covers

The company reports reactor commissioning and materials projects as it develops ground-based scale-up capability. Its intended model connects future space-grown semiconductor seeds with further processing on Earth; this update is not a report of returned orbital semiconductor production.

Engineering Context

A manufacturing mission needs an end-to-end process, including recovery, characterisation and downstream production. Ground infrastructure is an important part of the commercial case.

Back to the Story List ↑

Space Robotics · Development Awards

NASA Selects Payloads for Future Robotic Operations

NASA:

NASA selected three teams in its Robotically Manipulated Payload Challenge, with awards of up to $500,000 each to develop flight-ready payloads for potential orbital demonstrations.

What the Update Covers

The challenge targets payloads that robotic arms can handle or reconfigure, supporting capabilities such as inspection, modular upgrades and structural assembly. NASA’s October update places the payload launches in early 2028: these are development selections, not completed flight results.

Engineering Context

Interfaces between a robot and its payload are central to maintainable spacecraft. Demonstrating those interfaces could help designers plan systems that can be inspected, replaced or upgraded in orbit.

Back to the Story List ↑

Materials Research · Orbital Exposure Testing

Engineering Polymers to Survive Low Earth Orbit

University of Illinois Urbana-Champaign:

Illinois researchers report polymer formulations that form a protective surface layer when exposed to atomic oxygen. Several formulations showed reduced erosion in samples tested outside the International Space Station.

What the Update Covers

The April article discusses analysis of earlier flight samples and a further exposure campaign begun in January 2026. It also connects the materials work to ambitions for manufacturing composite structures in orbit; it does not establish that those structures have already been manufactured there.

Engineering Context

Producing a component is only part of the challenge. Materials must retain useful properties through exposure to the orbital environment, making durability testing essential to qualification.

Back to the Story List ↑

UK Space Industry · Feasibility Studies

UK Backs Studies for Manufacturing Advanced Materials in Orbit

UK Space Agency:

The UK Space Agency announced three studies covering pharmaceutical manufacturing, semiconductor seed crystals and specialist ZBLAN optical fibre production in low Earth orbit.

What the Update Covers

The contracts went to BioOrbit, Space Forge and OrbiSky. They focus on technical feasibility, technology development and routes to market. The announcement concerns studies rather than established commercial production services.

Engineering Context

These projects highlight how different products place different demands on mission design, process control, recovery and verification. Demonstrating a benefit in microgravity must be connected to a workable overall manufacturing process.

Back to the Story List ↑

2025 News & Research

Semiconductors · Orbital Demonstration

ForgeStar-1 Generates Plasma in Orbit

Space Forge:

Space Forge reported generating plasma aboard its ForgeStar-1 satellite, demonstrating conditions needed for gas-phase crystal growth on a free-flying commercial spacecraft.

What the Update Covers

The company described this as a step towards semiconductor manufacturing. Plasma generation establishes a process capability; this announcement did not report delivery of finished, space-grown semiconductor products.

Engineering Context

Process control and repeatability are essential links between an orbital experiment and a useful manufacturing service. The results provide a foundation for further materials testing.

Back to the Story List ↑

Metal Additive Manufacturing · Materials Testing

Examining Metal Printed on the Space Station

ESA:

ESA described detailed examination of a metal sample printed on the International Space Station and returned to Earth, including microscopy, CT scanning and mechanical testing.

What the Update Covers

Engineers compared the orbital sample with material produced using the same printer on Earth. The November article described the testing process, with analysis and publication of findings still to follow. The printing itself took place earlier; 2025 marks the return and examination reported here.

Engineering Context

Qualification depends on understanding internal defects and mechanical properties, not just successfully producing a shape. This work connects orbital fabrication to evidence needed for useful components.

Back to the Story List ↑

Return Technology · Parabolic Flight Testing

Pridwen Heat Shield Tested in Reduced Gravity

Space Forge:

Space Forge reported deployment trials of its folding Pridwen heat shield during parabolic flights with ZeroG, gathering data from full and partial deployments.

What the Update Covers

These tests explored deployment behaviour during brief periods of microgravity aboard an aircraft. They were not an orbital re-entry or a demonstration of recovering manufactured products from space.

Engineering Context

Manufacturing for customers on Earth requires a reliable return route. Deployment tests help reduce one part of that risk, while thermal protection and complete mission recovery require further evidence.

Back to the Story List ↑

Optical Manufacturing · Research Preprint

Research Explores Making Optical Lenses in Microgravity

Omer Luria and Co-authors · arXiv Submission:

A research preprint reports experiments using surface tension to shape optical components aboard the ISS during the earlier Ax-1 mission. The work includes UV-cured polymer lenses and a 172 mm water lens.

What the Update Covers

The authors report very smooth surfaces, but also deformation in some cured polymer lenses. The water-lens experiment demonstrated basic optical functionality. This entry uses the preprint submission date; the experiments were not new flights in October 2025.

Engineering Context

Microgravity offers ways to form optical surfaces without conventional grinding. Controlling curing and liquid handling remains important before the approach can become a dependable manufacturing process.

Back to the Story List ↑

Orbital Logistics · Repeated Return Missions

Repeated Varda Returns Demonstrate Orbital Logistics Cadence

Rocket Lab:

Rocket Lab reported support for Varda’s third capsule return, following another successful return roughly two months earlier.

What the Update Covers

The announcement described the Pioneer spacecraft’s recurring roles in power, communications, attitude control, orbital operations and preparation for capsule re-entry. It provides a later logistics milestone beyond the first return recorded in 2024, rather than evidence that every possible manufacturing process is commercially proven.

Engineering Context

A repeatable service needs predictable preparation, mission operations and recovery. Increasing flight cadence is relevant to future manufacturing supply chains, although product quality, demand and economic performance must be evaluated separately from successful transport.

Back to the Story List ↑

Manufacturing Research · Research Presentation

Combining Physics and Computation for Space Manufacturing

University of Illinois Chicago:

UIC highlighted Azadeh Haghighi’s research presentation on combining artificial intelligence, physics and manufacturing methods for future in-space manufacturing and assembly.

What the Update Covers

The university article describes work on computational tools and manufacturing techniques aimed at reliability, repeatability, safety and structural integrity. It is a research overview with a recorded talk, rather than an announcement of a completed orbital manufacturing demonstration.

Engineering Context

Predictive tools can help engineers understand processes before flight and interpret experimental results. Their usefulness depends on validation against physical measurements and the intended operating environment.

Back to the Story List ↑

2024 News & Research

Joining & Repair · Reduced-Gravity Research

Testing Laser Welding for Future Space Construction

NASA:

NASA Marshall and The Ohio State University reported laser-welding experiments conducted in a vacuum chamber during parabolic flights, exploring how reduced gravity affects welding processes and materials.

What the Update Covers

The August 2024 flight campaign simulated short periods of microgravity and lunar gravity. Researchers gathered measurements to support analysis and modelling. These were aircraft-based experiments, not welding operations in orbit or on the Moon.

Engineering Context

Reliable joining could support larger assembled structures and repairs. Understanding the weld pool, heat transfer and resulting material properties is essential before treating welding as a qualified mission capability.

Back to the Story List ↑

Metal Additive Manufacturing · Orbital Demonstration

ESA Completes a Metal 3D Print on the ISS

ESA:

ESA announced that its technology demonstrator had completed a metal 3D shape aboard the International Space Station. The complete sample followed an earlier single-track calibration print.

What the Update Covers

The printer finished the first shape in August 2024. ESA planned to return the samples for quality analysis, so the announcement demonstrated fabrication rather than qualification of spare parts for operational use.

Engineering Context

Printing near the point of use could reduce dependence on resupply. Material testing and process assurance remain necessary steps between making a test shape and producing a dependable replacement component.

Back to the Story List ↑

Debris Inspection · Proximity-Operations Safety

ADRAS-J Inspection Demonstrates an Autonomous Safety Retreat

Astroscale:

Astroscale described imaging of an unprepared rocket upper stage and an autonomous retreat during an ADRAS-J fly-around attempt.

What the Update Covers

The spacecraft maintained a distance of about 50 metres while gathering imagery. An attitude anomaly triggered an abort roughly one-third of the way around, and the vehicle moved away safely. This announcement records a partial observation and functioning safety response, not a completed debris-removal operation.

Engineering Context

Inspection of an existing object involves uncertainties absent from a purpose-built docking target. Fault detection and safe retreat must remain effective during close operations, making this a useful case study for the safety design of future servicing missions.

Back to the Story List ↑

Optical Fibre · Orbital Manufacturing

Producing Long Lengths of Optical Fibre in Microgravity

NASA:

NASA reported that the Flawless Space Fibers-1 investigation produced a total of 11.9 km of optical fibre aboard the ISS between mid-February and mid-March 2024.

What the Update Covers

The experiment used ZBLAN glass and demonstrated long fibre draws. At the time of the article, the fibres were due to return to Earth for quality analysis. Production length alone does not establish optical performance or commercial viability.

Engineering Context

Useful manufacturing output depends on both quantity and quality. Fibre attenuation, consistency and the economics of return and processing must be considered alongside the advantages of microgravity.

Back to the Story List ↑

Orbital Robotics · External Demonstration

GITAI Reports Completion of External ISS Robotic Tasks

GITAI:

GITAI announced that its S2 dual-arm robotic system had completed the planned tasks in an external ISS technology demonstration.

What the Update Covers

The 1.5-metre system operated outside the Bishop Airlock, following the company’s earlier demonstration inside the station. The announcement distinguished completion of the task sequence from reliability evaluation, which was to continue during the remaining demonstration period.

Engineering Context

Operating outside a spacecraft is a significant change from a protected cabin trial. Task success and sustained reliability provide different kinds of evidence, and both matter when considering robots for assembly or routine servicing.

Back to the Story List ↑

Robotic Construction · Ground Demonstration

Robots Assemble and Dismantle a Lunar Communications Tower Prototype

GITAI:

GITAI reported construction of a five-metre communications tower using a rover and three inchworm robots in a simulated lunar environment on Earth.

What the Update Covers

The demonstration included installing communications equipment and then disassembling the tower to represent maintenance activities. The company used robots with grapple interfaces at both ends of their arms. This was a terrestrial construction trial, not an operation on the Moon.

Engineering Context

Reversible assembly can support repair, relocation and reuse of infrastructure. Ground demonstrations help explore handling sequences and cooperative robotics, while lunar deployment would require further evidence for the environmental and operational conditions encountered there.

Back to the Story List ↑

Microgravity Manufacturing · Product Return

Varda Capsule Returns Space-Grown Pharmaceutical Crystals

Rocket Lab:

Rocket Lab reported the successful return of Varda’s capsule carrying pharmaceutical crystals produced during its orbital mission.

What the Update Covers

The spacecraft provided power, communications and control for more than eight months, supporting growth of ritonavir crystals. Rocket Lab performed the manoeuvres preparing the capsule for return, while Varda managed re-entry and recovery. Laboratory analysis was described as the next step.

Engineering Context

Manufacturing for terrestrial customers requires a complete route back to Earth. Capsule interfaces, trajectory control, recovery and subsequent product assessment are part of the production system, rather than separate concerns after the material has been made.

Back to the Story List ↑

Autonomous Assembly · Ground Demonstration

ARMADAS Robots Assemble a Large Modular Structure

NASA:

NASA’s ARMADAS team demonstrated three robots working together to assemble a metres-scale structure from hundreds of modular building blocks at Ames Research Center.

What the Update Covers

The laboratory demonstration combined robotic transport, placement and fastening with automated task planning. NASA reported the research alongside publication of the results in Science Robotics. This was a ground test, not an orbital construction mission.

Engineering Context

Designing components and assembly robots together can simplify handling and positioning. Reversible connections also offer a route to reconfiguration, repair and reuse, subject to validation for the intended space environment.

Back to the Story List ↑

Deployable Structures · Flight-Test Lessons

DOLCE Deployment Lessons Inform Lightweight Space Structures

California Institute of Technology:

Caltech’s mission review described how engineers overcame deployment difficulties with the DOLCE lightweight structure aboard its space solar power demonstrator.

What the Update Covers

A snagged wire and a later jam interrupted deployment. Engineers used onboard imagery and a ground model to investigate, ultimately freeing the structure through actuator motions. This adds structural deployment lessons to the archive’s earlier coverage of the mission’s wireless power experiment.

Engineering Context

Very lightweight structures are difficult to test fully under Earth gravity. Flight instrumentation, representative ground models and recovery options can be decisive when the deployed hardware behaves differently from expectations.

Back to the Story List ↑

2023 News & Research

Space Robotics · Flight Preparation

GITAI Prepares Robotic Arms for an External ISS Demonstration

GITAI:

GITAI reported completing NASA safety reviews for its S2 dual robotic arm system and handing over the flight hardware ahead of a planned external demonstration on the ISS.

What the Update Covers

The September announcement concerned readiness for a mission expected in early 2024. It described planned servicing, assembly and manufacturing tasks; it was not a report that the external flight demonstration had already taken place.

Engineering Context

Flight preparation includes more than proving a robot can perform a task. Safety, environmental testing and integration with the host spacecraft are essential parts of turning a laboratory capability into an operational payload.

Back to the Story List ↑

Biomanufacturing · Orbital Research

Redwire Reports Meniscus Bioprinting on the ISS

Redwire:

Redwire announced that its BioFabrication Facility had bioprinted a human knee meniscus on the International Space Station as part of the BFF-Meniscus-2 investigation.

What the Update Covers

According to the company, printing took place in July, followed by 14 days of culture aboard the station and return to Earth for analysis. The announcement reported a research milestone, not a clinically approved implant or treatment.

Engineering Context

Biomanufacturing broadens the range of products investigated in microgravity. Process control, sample preservation, return logistics and verification all contribute to assessing whether an orbital production method is useful.

Back to the Story List ↑

Space Power · Orbital Demonstration

Caltech Demonstrates Wireless Power Transfer in Space

Caltech:

Caltech reported that its MAPLE experiment transferred power wirelessly between nearby receivers in space and transmitted a signal that was detected on Earth.

What the Update Covers

MAPLE used lightweight, flexible microwave transmitter arrays aboard the SSPD-1 demonstrator. The experiment demonstrated a technology building block; it did not establish a commercial power station supplying usable grid electricity from orbit.

Engineering Context

Large space-power concepts depend on low-mass structures, deployment or assembly, and precise coordination of many components. This experiment is relevant to the infrastructure such manufacturing and assembly techniques could eventually support.

Back to the Story List ↑

Industry Collaboration · Mission Development

NASA Announces the COSMIC ISAM Consortium

NASA:

NASA announced the Consortium for Space Mobility and ISAM Capabilities, known as COSMIC, to bring together government, industry, research organisations and academia.

What the Update Covers

The announcement focused on collaboration around capability development, business cases and mission applications for servicing, assembly and manufacturing. It was an organisational initiative rather than a new hardware demonstration.

Engineering Context

Designing spacecraft for later inspection, refuelling or component replacement requires coordination across organisations. Shared requirements and compatible interfaces can be as important as the individual robotic or manufacturing technologies.

Back to the Story List ↑

2022 News & Research

Technology Review · Mission Planning

NASA Reviews the 2022 ISAM Landscape

NASA · Research White Paper:

NASA’s 2022 ISAM State of Play organised servicing, assembly and manufacturing capabilities into 11 areas, providing a reference for mission designers and technology developers.

What the Update Covers

The review brought together operational heritage and emerging developments. It is a historical snapshot of the field in 2022, rather than evidence that every capability described was flight-proven or commercially available.

Engineering Context

Comparing successive reviews helps trace how concepts develop into hardware and operational services. It also highlights the supporting capabilities needed to incorporate manufacturing into a complete mission.

Back to the Story List ↑

Robotic Assembly · Ground Environmental Testing

GITAI Tests Robotic Assembly in a Thermal-Vacuum Chamber

GITAI:

GITAI reported autonomous solar-panel assembly and orbital replacement unit exchange tasks inside JAXA’s large thermal-vacuum chamber during tests in February 2022.

What the Update Covers

The company also reported a 14-hour endurance test. These activities demonstrated operation under simulated space conditions on Earth; they were not an orbital servicing mission.

Engineering Context

Environmental testing connects task performance with hardware reliability. Assembly and replacement operations must remain dependable despite temperature extremes, vacuum and the constraints of the intended host spacecraft.

Back to the Story List ↑

Microgravity Manufacturing · Research Awards

NASA Selects Manufacturing Research for Products Used on Earth

NASA:

NASA selected eight proposals under its In Space Production Applications programme, covering areas including specialist glass, semiconductor materials, pharmaceutical research and biomanufacturing.

What the Update Covers

The selections supported development towards proof-of-concept flight demonstrations and potential commercial markets. They were research awards, not announcements of completed production services or proven product benefits.

Engineering Context

Manufacturing in orbit for use on Earth requires more than an interesting process. Product performance, transport, recovery and customer requirements all influence whether a mission can deliver practical value.

Back to the Story List ↑

Polymer Additive Manufacturing · Ground Prototype

IMPERIAL Explores Printing Beyond a Fixed Build Volume

ESA · Technology Video:

ESA presented its IMPERIAL printer, a ground-based prototype designed to produce high-performance polymer parts extending beyond the printer’s size along one direction.

What the Update Covers

The technology was developed with manufacturing in weightlessness in mind. ESA described orbital testing aboard the ISS as a possible next step; this 2022 presentation did not report that such a flight test had occurred.

Engineering Context

Reducing the constraint imposed by a fixed build volume could expand the range of parts produced from compact equipment. Feedstock, handling, power and process verification would still constrain an operational manufacturing system.

Back to the Story List ↑

Deployable Space Structures · Commissioning

Webb Completes Its Major Structural Deployments

NASA:

NASA confirmed completion of Webb’s major deployments after the starboard primary-mirror wing extended and latched into position.

What the Update Covers

With the secondary-mirror tripod and primary-mirror wings deployed, the telescope could proceed to optical alignment. This milestone concerned a pre-built structure unfolding in space; precise alignment and commissioning were separate tasks still to follow.

Engineering Context

Large spacecraft can overcome launch-envelope constraints through deployment, assembly or manufacturing after launch. Webb provides a useful deployment comparison, showing why successful mechanical positioning and verified operational performance are distinct stages.

Back to the Story List ↑

2021 News & Research

Robotic Assembly · ISS Demonstration

GITAI Demonstrates Autonomous Assembly Inside the ISS

GITAI:

GITAI reported that its S1 robot completed assembly and equipment-operation tasks inside the ISS Nanoracks Bishop Airlock during a demonstration on 13–16 October 2021.

What the Update Covers

The tasks included assembling structures and panels, operating switches and handling cables. GITAI reported autonomous execution and additional teleoperated equipment tasks. This was an internal ISS demonstration, rather than construction in the external space environment.

Engineering Context

Assembly trials help test how robots interact with components and interfaces. Moving from a controlled cabin to external operations introduces further requirements for environmental protection, positioning and reliable handling.

Back to the Story List ↑

Additive Manufacturing · Parabolic-Flight Research

Researchers Test Powder-Based Manufacturing in Weightlessness

D’Angelo et al. · arXiv Revision Date:

Researchers described a powder-handling and additive manufacturing process intended to work independently of gravity, supported by simulations and printing experiments on the ground and during parabolic flight.

What the Update Covers

The process uses controlled boundary loading to transport, homogenise and compress powder. The paper reports proof-of-concept printing with feedstocks of differing flowability. The linked arXiv record was first submitted on 19 February 2021 and revised on 8 October; it also links to the journal publication in Additive Manufacturing.

Engineering Context

Powder control is a central challenge for manufacturing in reduced gravity. Parabolic-flight results provide useful experimental evidence, while sustained orbital operation would require further work on containment, repeatability and integration with spacecraft systems.

Back to the Story List ↑

Satellite Servicing · Magnetic Capture

ELSA-d Validates Magnetic Capture with Its Client Spacecraft

Astroscale:

Astroscale reported a successful release-and-capture demonstration using ELSA-d’s magnetic capture system.

What the Update Covers

After unlocking the launch restraint, the servicer released and recaptured its dedicated client spacecraft. Teams also checked rendezvous sensors and ground procedures. More demanding separation and tumbling demonstrations were still future objectives in this announcement. The date follows the page’s publication label.

Engineering Context

Prepared capture interfaces can simplify servicing, but successful close-range capture does not by itself demonstrate every approach scenario. Clear separation of tested conditions from later objectives is important when assessing the readiness of a removal or servicing architecture.

Back to the Story List ↑

Resource Utilisation · Planned ISS Experiment

Redwire Announces Regolith-Simulant Printing for the ISS

Redwire:

Redwire announced hardware for an ISS experiment using lunar regolith simulant as part of its printing feedstock, linking microgravity manufacturing research with longer-term lunar construction objectives.

What the Update Covers

The planned Regolith Print demonstration would use the existing Additive Manufacturing Facility with custom printing heads and surfaces. Samples were intended for return and analysis after successful printing. This announcement described a planned experiment using simulated material, not construction with actual lunar soil.

Engineering Context

Testing a manufacturing process in orbit can inform future resource-use concepts. Lunar deployment would still require assessment of local material properties, partial gravity, dust, thermal conditions and the performance of finished structures.

Back to the Story List ↑

Commercial Servicing · Operational Docking

MEV-2 Docks with a Satellite in Its Operational GEO Location

Northrop Grumman and Intelsat:

Northrop Grumman and Intelsat announced docking of MEV-2 with the Intelsat 10-02 communications satellite.

What the Update Covers

Unlike the earlier MEV-1 operation above the operational GEO region, this docking took place at the client’s operational orbital location. The announcement described a contracted five-year life-extension service, providing a further operational example of satellite servicing.

Engineering Context

Servicing a spacecraft where it operates changes the mission constraints and the need to protect ongoing services. Repeated missions also provide evidence about whether a capability can become a usable service beyond its first demonstration.

Back to the Story List ↑

Space Structures · Research Programme Announcement

DARPA Launches NOM4D for Manufacturing Large Space Structures

DARPA:

DARPA announced NOM4D, a research programme exploring materials, manufacturing processes and designs for large structures that could be built beyond Earth rather than launched as finished hardware.

What the Update Covers

The programme proposed progressively demanding structural-efficiency and precision targets, using solar arrays, radio-frequency reflectors and infrared telescope structures as exemplars. Planned validation included ground fabrication of subscale structures; the announcement did not report completed orbital construction.

Engineering Context

Manufacturing after launch changes the design problem: structures may avoid some launch-survival constraints, but must still meet stiffness, precision, thermal and operational requirements. These trade-offs connect manufacturing choices directly with mission architecture.

Back to the Story List ↑

2020 News & Research

Ceramic Manufacturing · ISS Demonstration

Redwire Reports Ceramic Printing on the ISS

Redwire:

Redwire reported that its Ceramic Manufacturing Module had autonomously produced a turbine blisk and material test samples in orbit, using stereolithography with pre-ceramic resins.

What the Update Covers

The announcement described a manufacturing demonstration, with the printed samples scheduled to return to Earth for analysis. Improved quality compared with terrestrial turbine components remained a potential benefit to investigate, rather than an established result of this announcement.

Engineering Context

Producing a test part is one step towards a usable engineering component. Material characterisation, subsequent processing, dimensional accuracy and qualification remain important when assessing the value of manufacturing in microgravity.

Back to the Story List ↑

Materials Research · Ground-Based Manufacturing

ESA Evaluates Desktop Printing of Metals and Ceramics

ESA:

ESA highlighted a process developed by TIWARI Scientific Instruments that uses desktop filament printing to shape metal and ceramic parts, followed by thermal treatment to remove the plastic binder.

What the Update Covers

Test pieces in stainless steel, titanium, alumina and silicon carbide underwent destructive and non-destructive assessment at ESA’s ESTEC materials laboratory. This was ground-based research into parts for space applications, rather than a demonstration of printing those materials in orbit.

Engineering Context

A manufacturing system must accommodate the complete process, including thermal treatment and verification. Research into accessible printing methods is relevant to space engineering, but adapting equipment for orbital use introduces additional constraints.

Back to the Story List ↑

Microgravity Research · Historical Overview

NASA Reviews Manufacturing Among Two Decades of ISS Research

NASA:

NASA’s twenty-year ISS science retrospective included additive manufacturing, tracing the progress from the station’s first 3D printer in 2014 to investigations of recycled feedstock and bioprinting.

What the Update Covers

The feature explains how station experiments support research into producing needed items during longer missions. It is a retrospective published in 2020: the milestones it describes span earlier years and should not all be read as new achievements that year.

Engineering Context

Manufacturing sits within a wider mission system of supplies, maintenance, waste handling and crew time. This overview provides an accessible starting point for considering how an orbital laboratory supports the development of future production capabilities.

Back to the Story List ↑

Commercial Servicing · Satellite Life Extension

Intelsat 901 Returns to Service with a Mission Extension Vehicle

Intelsat:

Intelsat announced that its 901 satellite had returned to service following docking with Northrop Grumman’s MEV-1.

What the Update Covers

The combined spacecraft became operational after the February docking. MEV-1 supplied the capability to reposition and control the client satellite, extending the usefulness of existing communications hardware. This was life extension through an attached servicing vehicle, rather than replenishment of the client’s fuel tanks.

Engineering Context

Servicing can preserve useful payloads even when the original spacecraft has exhausted an operational resource. The approach offers a practical comparison with replacing a complete satellite, while introducing requirements for docking, coupled control and long-term service arrangements.

Back to the Story List ↑

Robotic Assembly · Historical Mission Announcement

NASA Funds SPIDER Assembly and Manufacturing Plans

NASA:

NASA announced a contract for the SPIDER payload to assemble a communications antenna and manufacture a spacecraft beam in orbit, as part of the spacecraft then known as Restore-L.

What the Update Covers

The proposed demonstration combined robotic assembly with in-space fabrication. This article records the 2020 plan, not a completed flight. The wider mission became OSAM-1; NASA subsequently announced its discontinuation in March 2024, citing technical, cost and schedule challenges and changing demand.

Engineering Context

The concept illustrates how assembly and manufacturing can be integrated into a servicing mission. Its later outcome also highlights the importance of programme feasibility, customer requirements and system-level integration alongside technical ambition.

Back to the Story List ↑

2019 News & Research

Biomanufacturing · ISS Research Operations

NASA Begins BioFabrication Facility Trials on the ISS

NASA:

NASA reported that astronaut Christina Koch activated the new BioFabrication Facility aboard the ISS to test its ability to print cells, beginning an early stage of orbital bioprinting research.

What the Update Covers

The station update described equipment activation and testing. Fabricating human organs was presented as a possible future application; this report did not establish that transplant-ready organs had been produced or that a clinical manufacturing service was available.

Engineering Context

Biomanufacturing expands the range of processes considered for orbital facilities. Beyond printing, such systems must address environmental control, sample handling, maturation and verification of the resulting material.

Back to the Story List ↑

Structural Manufacturing · Historical Mission Announcement

NASA Funds Archinaut One’s Orbital Manufacturing Demonstration

NASA:

NASA awarded Made In Space a contract to develop Archinaut One, a proposed spacecraft demonstration combining the manufacture of structural beams with the deployment of solar arrays in orbit.

What the Update Covers

The 2019 announcement outlined a planned flight demonstration, building on earlier ground development. The project later became known as OSAM-2. NASA’s subsequent mission record confirms that it concluded in 2023 before a flight demonstration took place.

Engineering Context

Building structures after launch could reduce the constraints imposed by a rocket’s payload envelope. Achieving that capability requires manufacturing equipment, robotics, deployment mechanisms and spacecraft control to operate together reliably.

Back to the Story List ↑

Bioprinting Research · Ground Demonstration

ESA Explores Tissue Printing for Future Space Missions

ESA:

ESA described research into printing skin and bone samples for possible use during long-duration exploration missions, including ground experiments that printed samples upside down.

What the Update Covers

The work explored printing techniques and the facilities that future spacecraft might need. Upside-down printing challenged the process under gravity; it was not an orbital or microgravity demonstration, nor evidence of an operational treatment capability for astronauts.

Engineering Context

Adapting a process for space involves more than the printer itself. Sterility, supporting equipment, consumables and crew procedures would all influence whether tissue manufacturing could become a practical part of a mission.

Back to the Story List ↑

Cryogenic Logistics · Operational Setback

RRM3 Cooling Failure Prevents Its Planned Cryogenic Transfer

NASA:

NASA reported that the Robotic Refueling Mission 3 could no longer perform its planned cryogenic fuel transfer after problems powering its coolers.

What the Update Covers

Liquid methane warmed, became gas and was safely vented after troubleshooting failed to restore cooling. NASA reported no effect on other station operations. Servicing and inspection-tool activities remained planned, but the intended cryogenic transfer was lost.

Engineering Context

A refuelling mission depends on storage and thermal control as well as connectors and robotics. This case highlights how a supporting subsystem can determine whether the central operation remains possible, and why alternate objectives can preserve value after a failure.

Back to the Story List ↑

Debris Capture · Alternative Mechanisms

RemoveDEBRIS Tests Harpoon Capture Against a Mounted Panel

University of Surrey:

The RemoveDEBRIS team reported a successful orbital test of a harpoon designed to penetrate a representative target panel.

What the Update Covers

A panel mounted on a 1.5-metre boom provided the target for the Airbus-developed mechanism, fired at 20 metres per second. This was a different capture method from the mission’s earlier net experiment, tested against dedicated hardware rather than an uncontrolled satellite.

Engineering Context

Different capture mechanisms create different interface loads and failure modes. A penetrating device raises questions about target material, retention and fragments, making representative testing essential before considering a real debris-removal application.

Back to the Story List ↑

Recycling and Reuse · ISS Installation

Refabricator Brings Integrated Recycling and Printing Hardware to the ISS

NASA:

NASA announced the installation of Refabricator, an integrated plastic recycler and 3D printer developed by Tethers Unlimited for experiments aboard the International Space Station.

What the Update Covers

The automated unit was designed to convert plastic material into feedstock for printing new items. This announcement reported installation ahead of experiment operations, rather than verified performance over repeated recycling cycles.

Engineering Context

Reusing materials could help reduce dependence on resupply and make better use of limited storage. Practical evaluation must consider feedstock quality, contamination, energy consumption and how repeated processing affects the strength of printed parts.

Back to the Story List ↑

2018 News & Research

Optical Materials · Laboratory Research

Researchers Investigate Thermal Processing of ZBLAN Glass

Ong et al. · First Online Publication:

A study in the International Journal of Applied Glass Science reported that rapid heating and cooling could suppress crystallisation in ZBLAN glass test samples, a material of interest for optical fibres.

What the Update Covers

The researchers used a purpose-built electro-thermal processing device and electron microscopy to assess the samples. This was laboratory materials research, not an orbital manufacturing demonstration. The paper first appeared online on 29 December 2018, ahead of its 2019 journal issue.

Engineering Context

Ground-based process improvements provide an important comparison for space-manufacturing proposals. Demonstrating an orbital advantage requires assessment against terrestrial alternatives, including material quality, processing limits and the performance of the finished product.

Back to the Story List ↑

Optical Fibre Manufacturing · Early Orbital Research

ISS National Lab Reviews Early ZBLAN Fibre Manufacturing

ISS National Laboratory · Upward:

The ISS National Laboratory examined commercial efforts to manufacture ZBLAN optical fibre in microgravity, including Made In Space’s initial ISS experiments and the challenges of controlling glass quality.

What the Update Covers

The feature described early process development, including an experiment focused on fibre-puller temperature settings following a December 2017 launch. The promise of lower optical losses was a motivation for research, rather than evidence that routine commercial production had already been established.

Engineering Context

A useful manufacturing comparison must connect processing conditions with measured fibre performance. Repeatability, usable production lengths, return logistics and customer specifications all matter when evaluating the practical value of orbital production.

Back to the Story List ↑

Recycling and Reuse · Hardware Launch

Refabricator Launches for ISS Recycling Experiments

NASA:

NASA reported that Refabricator, an integrated recycler and 3D printer, had launched towards the ISS aboard the Cygnus resupply mission on 17 November 2018.

What the Update Covers

The planned experiment would recycle controlled plastic feedstock repeatedly, print new parts and return samples for quality assessment. This announcement marked the hardware’s launch; it did not report successful repeated recycling operations in orbit.

Engineering Context

Closing the manufacturing loop could reduce waste and demand for replacement feedstock. Material degradation and process consistency must be measured across repeated cycles before recycled parts can be relied on for engineering use.

Back to the Story List ↑

Polymer Manufacturing · Printer Development

ESA Develops MELT for Printing Engineering Plastics in Space

ESA:

ESA presented its MELT printer, designed for use in weightlessness and capable of processing thermoplastics ranging from ABS to high-temperature engineering materials such as PEEK.

What the Update Covers

The development targeted operation in different orientations, accommodation within an ISS payload rack and compliance with station safety requirements. ESA described potential repair and maintenance applications; this feature did not report an operational printing demonstration aboard the ISS.

Engineering Context

Material capability must be considered alongside spacecraft accommodation. Power, heat management, containment, crew safety and verification of printed parts all influence how a printer could support a long-duration mission.

Back to the Story List ↑

Debris Capture · Orbital Demonstration

RemoveDEBRIS Captures a Released Target with a Net

ISISPACE · Mission Partner Report:

The University of Surrey announced that RemoveDEBRIS had captured a deployed target using its experimental net.

What the Update Covers

The test took place on 16 September and used a target released for the demonstration to represent space debris. The university-led consortium’s mission investigated capture technologies in orbit; this result did not represent removal of an independently encountered derelict spacecraft.

Engineering Context

Capture changes the dynamics of both the servicing vehicle and its target. Demonstrations with known objects help develop the technology, while operational debris removal must also account for uncertain geometry, motion and structural condition.

Back to the Story List ↑

2017 News & Research

Optical Fibre Manufacturing · Payload Delivery

Optical Fibre Manufacturing Experiment Arrives at the ISS

NASA:

NASA reported that SpaceX CRS-13 had delivered a Made In Space investigation to the ISS to explore drawing optical fibre from ZBLAN glass in microgravity.

What the Update Covers

The station update confirmed arrival of the research payload and described its intended experiment. Higher-quality fibre was a potential outcome to investigate; delivery alone did not establish a manufacturing advantage or a commercial production capability.

Engineering Context

Moving equipment into orbit enables testing under sustained microgravity, but process operation and product assessment remain separate milestones. Fibre quality, repeatability and recovery of samples determine what can be learned from the experiment.

Back to the Story List ↑

Materials Processing · Research and Commercial Assessment

Research Examines the Case for Optical Glass Production in Orbit

Cozmuta and Rasky · New Space:

A research paper examined exotic optical fibres and glasses as candidates for orbital manufacturing, considering how gravity-dependent processes affect material quality and the potential markets for improved products.

What the Update Covers

The authors connected materials-processing questions with possible commercial applications. The paper set out opportunities and a prospective business case; it did not demonstrate that sustained orbital production was already profitable or that theoretical optical performance had been achieved commercially.

Engineering Context

Assessing a manufacturing mission requires both a technical comparison and an economic one. Product performance, achievable yield, demand, launch costs and return logistics must be considered together when deciding whether processing in orbit offers practical value.

Back to the Story List ↑

Structural Manufacturing · Ground Environmental Testing

Archinaut Tests Large-Scale Printing in a Space-Like Environment

NASA:

NASA described Archinaut testing that used Made In Space’s Extended Structure Additive Manufacturing Machine to demonstrate large-scale printing under simulated space temperature and vacuum conditions.

What the Update Covers

The test campaign took place in a vacuum chamber at NASA Ames. It was a ground demonstration supporting technology development, rather than manufacture in orbit. Later flight plans and the project’s eventual conclusion are covered in the linked 2019 entry.

Engineering Context

Environmental testing helps reveal how equipment and materials behave outside ordinary laboratory conditions. A chamber test provides evidence for selected requirements, while microgravity operation and full spacecraft integration still require separate assessment.

Back to the Story List ↑

Deployable Structures · Solar Power

Roll-Out Solar Array Begins an Orbital Deployment Trial

NASA:

NASA reported deployment of the Roll Out Solar Array experiment from the tip of Canadarm2 on 18 June.

What the Update Covers

Ground controllers extracted the experiment from a Dragon cargo spacecraft and positioned it for testing while attached to the station’s robotic arm. The flexible array was designed to unroll from a compact package, providing an orbital test of an alternative solar-array architecture.

Engineering Context

Compact packaging and predictable deployment are important for large power systems. An orbital trial can expose structural behaviour that is hard to reproduce under gravity, and robotic handling requirements need to be considered alongside the array’s electrical performance.

Back to the Story List ↑

Resource Utilisation · Ground Proof of Concept

ESA Tests Solar-Heated Printing of Lunar-Simulant Bricks

ESA:

ESA reported the production of bricks from simulated lunar soil using concentrated solar heat, exploring how local material and energy might support future construction on the Moon.

What the Update Covers

The experiments used terrestrial volcanic material prepared to resemble lunar soil and a solar furnace at DLR. Successive layers were heated to form bricks, with detailed mechanical testing still to follow. This was an Earth-based proof of concept, not construction using actual lunar regolith.

Engineering Context

Local-resource manufacturing could change the balance between launched equipment and imported construction materials. Scaling a process for the Moon would require further assessment of material variability, thermal behaviour, operating conditions and structural performance.

Back to the Story List ↑

2016 News & Research

Orbital Manufacturing · Facility Development

Additive Manufacturing Facility Broadens Access to Orbital Printing

NASA and Made In Space · Technical Summary:

A NASA technical summary described the Additive Manufacturing Facility installed on the ISS in April 2016 and its intended use by government, research and commercial customers.

What the Update Covers

The extrusion-based facility offered three polymer options and a build volume of approximately 14 × 10 × 10 centimetres. The summary traced its development from earlier microgravity printing work and described access through the ISS National Laboratory for a broader community of users.

Engineering Context

Moving from a demonstration to a shared facility adds questions about user access, supported materials, part selection and repeatable operations. Manufacturing capability must be matched to suitable components and their verification needs.

Back to the Story List ↑

Additive Manufacturing · Research Summary

NASA Reviews Orbital Printing Operations and Materials Testing

Prater et al. · NASA Research Abstract:

A NASA conference abstract summarised the 3D Printing in Zero G demonstration, comparisons between ground and flight specimens, and follow-on printing operations conducted during June and July 2016.

What the Update Covers

The research covered operational experience and a programme of inspection, dimensional measurement, mechanical testing and materials analysis. It also outlined lessons for the Additive Manufacturing Facility and further manufacturing research. The record is a conference abstract, rather than a complete experimental dataset.

Engineering Context

Printing a part successfully does not by itself establish its fitness for a particular task. Comparisons with ground controls and systematic materials testing help connect an orbital process with reliable engineering properties.

Back to the Story List ↑

On-Demand Manufacturing · ISS Demonstration

A Student-Designed Tool Is Printed Aboard the ISS

NASA:

NASA reported that Robert Hillan’s Multipurpose Precision Maintenance Tool had been printed aboard the ISS using the Additive Manufacturing Facility, following its selection in the Future Engineers Space Tool Challenge.

What the Update Covers

The design combined features such as wrenches, socket attachments and a wire-gauge measuring tool. Astronaut Jeff Williams displayed the printed item from the station. The example demonstrated transferring a design into orbital fabrication, without establishing qualification for every intended maintenance task.

Engineering Context

Digital delivery of a design can make manufacturing more responsive to unexpected needs. Practical use still depends on material capability, dimensional accuracy, verification and a clear understanding of the loads and conditions the part must withstand.

Back to the Story List ↑

Expandable Structures · Orbital Demonstration

BEAM Expands and Pressurises on the Space Station

NASA:

NASA confirmed full expansion and pressurisation of the Bigelow Expandable Activity Module attached to the ISS.

What the Update Covers

The compact launched module expanded to provide additional internal volume. The update described leak checks and crew entry as subsequent steps, with a two-year test period then planned. This was deployment of a manufactured structure, rather than fabrication of its walls in orbit.

Engineering Context

Expandable structures offer one way to separate usable volume from launch dimensions. Their verification must include the deployed configuration, pressure integrity and environmental performance, providing a useful comparison with rigid assembly and in-space manufacturing approaches.

Back to the Story List ↑

Spacecraft Manufacturing · Ground-Based Design Research

ESA Explores Additive Manufacturing for Lighter Space Hardware

ESA · Clean Space:

ESA’s Clean Space programme discussed how additive manufacturing could enable lighter spacecraft components and greater design freedom, with some printed parts already flying and others undergoing qualification.

What the Update Covers

The feature described potential mass savings for selected applications. It concerned manufacturing hardware for space, rather than printing it in orbit; the benefits discussed should not be treated as guaranteed savings for every component or process.

Engineering Context

A lighter design is valuable only when it meets the required performance and assurance criteria. Material choice, production energy, post-processing, inspection and waste handling all affect the overall engineering and environmental assessment.

Back to the Story List ↑

Polymer Manufacturing · ISS Demonstration

Europe’s POP3D Demonstrates Plastic Printing on the ISS

Thales Alenia Space:

Thales Alenia Space reported that the Portable Onboard 3D Printer had produced a small plastic object aboard the ISS on 2 February 2016, in a demonstration led by the Italian Space Agency.

What the Update Covers

Astronaut Scott Kelly operated the printer, which produced a polylactic acid (PLA) part in less than an hour. The announcement described plans to return the item for comparison with equivalent ground-produced objects, rather than presenting the outcome of that later assessment.

Engineering Context

Compact printing demonstrations establish operational experience and provide samples for comparison. Developing a dependable source of replacement parts requires that experience to be linked with material testing, process control and application-specific requirements.

Back to the Story List ↑

2015 News & Research

Robotic Manufacturing and Assembly · Programme Selections

NASA Selects Robotic Manufacturing and Assembly Partnerships

NASA:

NASA selected three robotic in-space manufacturing and assembly projects within its Tipping Point partnerships, involving Orbital ATK, Made In Space and Space Systems Loral’s Dragonfly concept.

What the Update Covers

The selections supported technology maturation towards system-level demonstrations, with industry contributions alongside NASA funding. This was a development announcement, rather than confirmation that the proposed systems had assembled spacecraft or manufactured structures in orbit.

Engineering Context

Manufacturing and assembly technologies depend on coordinated development of robotics, interfaces and spacecraft systems. Partnership announcements help trace programme origins, but subsequent testing and mission outcomes provide the evidence needed to assess operational readiness.

Back to the Story List ↑

Surface Construction · Concept Design Competition

NASA Recognises 3D-Printed Habitat Design Concepts

NASA:

NASA announced the leading designs in the first stage of its 3D-Printed Habitat Challenge, which explored how additive manufacturing and local resources might support future habitats on Mars.

What the Update Covers

Mars Ice House received first place, followed by Team Gamma and Team LavaHive. Entries were assessed on architectural and engineering considerations including habitability, functionality and print constructability. These were design concepts, not completed habitats built on another world.

Engineering Context

Habitat concepts connect manufacturing choices with human needs, site conditions and structural requirements. Turning a design into a viable construction system requires materials evidence, process development and verification of the finished structure.

Back to the Story List ↑

Mission Architecture · Manufacturing Strategy

NASA Sets Out a Manufacturing Roadmap for Exploration

Niki Werkheiser · NASA Technical Presentation:

A NASA presentation considered how in-space manufacturing could influence exploration-system design, maintenance, repair and logistics, with the ISS supporting development of capabilities for longer missions.

What the Update Covers

The presentation emphasised materials characterisation, certification, design for additive manufacturing and collaboration with commercial developers. It described a development strategy and proposed capabilities, rather than reporting a fully established manufacturing supply chain for Mars.

Engineering Context

Manufacturing becomes more useful when considered early in mission design. Decisions about spare parts, feedstock, inspection and repair procedures shape the equipment and resources a spacecraft must carry.

Back to the Story List ↑

Robotic Inspection · Servicing Tools

Robotic Inspection Tool Receives an ISS Checkout

NASA · ISS Daily Summary:

NASA’s station operations report recorded a checkout of the Visual Inspection Poseable Invertebrate Robot, known as VIPIR.

What the Update Covers

Dextre handled Robotic Refueling Mission hardware and installed a new task board as part of the reported activities. VIPIR’s checkout formed part of the development of inspection capabilities for servicing work. The daily report records this specific operation, rather than claiming completion of an entire autonomous repair mission.

Engineering Context

Inspection helps establish where a tool is working and whether an operation has succeeded. Integrating cameras and inspection devices into a servicing workflow can be as important as providing the equipment that performs the physical repair.

Back to the Story List ↑

Additive Manufacturing · Returned-Sample Assessment

ISS-Printed Parts Return for Ground Comparison and Testing

NASA:

NASA reported the arrival at Marshall Space Flight Center of parts printed aboard the ISS during the 2014 3D Printing in Zero-G demonstration, ready for comparison with ground-produced samples.

What the Update Covers

The parts returned to Earth in February 2015 and were unboxed at Marshall on 6 April. Planned work included strength, structural and microscopic assessment against matching ground controls. This article marked preparation for testing, rather than publication of its final results.

Engineering Context

Returned samples connect a successful orbital build with measurable material properties. Ground controls and consistent test methods help distinguish environmental effects from printer settings and ordinary process variation.

Back to the Story List ↑

2014 News & Research

On-Demand Manufacturing · ISS Demonstration

ISS Printer Produces a Wrench from an Uploaded Design

NASA:

NASA reported that the ISS printer completed its first phase of operations by producing a plastic ratchet wrench from a design file transmitted from Earth.

What the Update Covers

The design was created, reviewed and uploaded before the printer built the wrench in four hours. NASA planned to return it with the other printed parts for analysis. This demonstrated the digital design-to-print process, rather than qualifying the wrench for unrestricted maintenance use.

Engineering Context

Uploading a design creates possibilities for responding to needs that were not anticipated before launch. Design approval, material selection and verification remain essential when turning that flexibility into a dependable maintenance capability.

Back to the Story List ↑

Polymer Manufacturing · First ISS Printing Demonstration

The ISS Produces Its First 3D-Printed Part

NASA:

NASA announced that the ISS 3D printer had produced its first manufactured part: a plastic faceplate for the printer’s own extruder casing, commanded from the ground on 24 November.

What the Update Covers

The part followed installation and calibration of the printer. NASA reported stronger-than-expected adhesion to the build tray and further adjustments, illustrating the experimental nature of this first phase. Detailed comparisons with ground-produced samples were still to come.

Engineering Context

A first successful build establishes feasibility and reveals practical operating questions. Repeatable production requires control of alignment, bonding, removal and material behaviour, alongside evidence that the finished parts meet their intended requirements.

Back to the Story List ↑

Polymer Manufacturing · Historical Mission Plans

ESA Presents Plans for Europe’s POP3D Space Printer

ESA:

ESA described the Italian-developed POP3D printer and plans to test it aboard the ISS, with attention to compact packaging, limited power demand and compatibility with the crew environment.

What the Update Covers

The proposed experiment would produce a plastic part for return and comparison with a ground-made counterpart. The article described a future mission, not a completed orbital print. The subsequent demonstration is covered in the archive’s February 2016 report.

Engineering Context

Printer performance is only one part of a flight experiment. Accommodation, safety, crew involvement and sample recovery must be considered together when designing a useful demonstration of manufacturing in space.

Back to the Story List ↑

Optical Hardware · Ground-Based Manufacturing Research

ESA Tests a Lighter Additively Manufactured Optical Mirror

ESA:

ESA and TNO explored redesigning a Tropomi instrument mirror for additive manufacturing, reporting a 54% mass reduction for a titanium version while preserving optical performance.

What the Update Covers

The study compared a redesigned printed mirror with the original aluminium design. ESA explicitly stated that the original mirror would fly because the instrument design was already frozen. The printed version was a ground research trial, not an orbitally manufactured or flown replacement.

Engineering Context

Additive manufacturing can enable geometry changes that outweigh differences in material density. Qualification methods, optical finish and documented material properties remain central to determining whether such a redesign is suitable for a future mission.

Back to the Story List ↑

Satellite Servicing · Ground Demonstration

Ground Test Demonstrates Remote Robotic Oxidizer Transfer

NASA:

NASA reported a ground demonstration of remotely connecting to a simulated satellite and transferring oxidizer through its servicing interface.

What the Update Covers

During the February RROxiTT tests, a robot at Kennedy Space Center was controlled from Goddard. The work used nitrogen tetroxide and included connection, leak checks, flow testing and disconnection. The hardware remained on Earth; the experiment represented operations needed for future satellite refuelling.

Engineering Context

Moving from a benign test fluid to real propellant brings additional materials, cleanliness and safety requirements. A complete servicing concept must address the fluid system and operating procedure together with the robot that makes the connection.

Back to the Story List ↑

2013 News & Research

Metal Additive Manufacturing · Research Programme

ESA Introduces AMAZE for Advanced Metal Manufacturing

ESA:

ESA described the AMAZE programme, bringing together European partners to develop high-quality metal additive manufacturing processes, equipment and supporting industrial capabilities.

What the Update Covers

The programme addressed alloys, printing methods, finishing, measurement and control. The article also set out ambitions for metal printing on the ISS and future space construction. These were prospective applications, not completed orbital demonstrations reported in 2013.

Engineering Context

Manufacturing capability depends on a repeatable process and a supporting supply chain. Feedstock quality, post-processing, inspection and common standards all influence whether a printed component can meet demanding spacecraft requirements.

Back to the Story List ↑

Space Robotics · Human–Robot Operations

Robonaut Research Reviews Maintenance Tasks and Planned Mobility

Ahlstrom et al. · NASA Technical Reports Server:

A technical paper reviewed more than a year of Robonaut 2 experiments aboard the ISS and preparations for a mobile configuration.

What the Update Covers

The work covered maintenance and servicing demonstrations by the humanoid upper-body robot. Proposed upgrades included legs for repositioning, battery power and wireless communications. The paper separates achievements inside the station from planned mobility and longer-term ambitions for external operations.

Engineering Context

Useful robotic assistance involves reaching a worksite and operating safely around people as well as manipulating a tool. Power, communications, supervision and verification of control behaviour affect whether automation actually reduces crew workload.

Back to the Story List ↑

Orbital Manufacturing · Concept Study

SpiderFab Study Explores Fabricating Large Structures in Orbit

Tethers Unlimited · NASA NIAC:

The SpiderFab Phase I final report investigated architectures for fabricating and integrating large spacecraft structures after launch.

What the Update Covers

The study considered manufacturing support trusses for solar arrays and robotic fabrication of structures such as antenna reflectors. It analysed potential advantages in packaging and structural performance. These were concept analyses and development work, not a demonstration of kilometre-scale construction in orbit.

Engineering Context

Manufacturing after launch can change the relationship between deployed size and launch packaging. The engineering case still depends on joining, dimensional control, material handling and verification of the completed structure, as well as any predicted mass or volume savings.

Back to the Story List ↑

On-Demand Manufacturing · Payload Development

NASA Outlines the 3D Printing in Zero-G Demonstration

Werkheiser et al. · NASA Conference Paper:

A NASA conference paper described development of the 3D Printing in Zero-G payload with Made In Space, intended to demonstrate fabrication aboard the ISS.

What the Update Covers

The work placed the planned experiment within a longer-term strategy for producing components and equipment during exploration missions. This 2013 record describes development before flight; the archive’s November 2014 story covers the first manufactured part.

Engineering Context

An initial technology demonstration must turn a broad mission objective into testable requirements. Payload development provides the link between laboratory equipment, spacecraft constraints and the evidence needed to assess manufacturing in orbit.

Back to the Story List ↑

Surface Construction · Ground Feasibility Study

ESA Studies Printing a Lunar Habitat from Local Materials

ESA:

ESA and industrial partners investigated a lunar habitat concept using additive manufacturing, producing a 1.5-tonne demonstration building block as part of the ground-based study.

What the Update Covers

The printing process used simulated lunar material and a binding solution. The habitat concept combined a protective printed shell with a pressurised inflatable interior. This was a feasibility investigation on Earth, not a completed Moon base or construction using actual lunar soil.

Engineering Context

Using local resources could reduce imported construction material, but equipment, binders and support systems still affect mission logistics. Dust, temperature, structural performance and process control remain central questions for lunar deployment.

Back to the Story List ↑

Robotic Servicing · Fluid Transfer Demonstration

Dextre Transfers Fluid into a Mock Satellite in Orbit

Canadian Space Agency:

The Canadian Space Agency announced that Dextre had successfully refuelled a mock satellite on the exterior of the ISS during the Robotic Refueling Mission.

What the Update Covers

The NASA–CSA experiment demonstrated access and fluid-transfer operations representative of servicing satellites whose valves were not intended to be opened in space. It used a purpose-built demonstration module and a simulated refuelling operation, rather than replenishing an operational satellite.

Engineering Context

Fluid services require tools to open protective layers, connect to existing hardware and complete a controlled transfer. Demonstrating that sequence is a useful step toward orbital logistics, while flight demonstrations must still be distinguished from an operational refuelling service.

Back to the Story List ↑

Robotic Servicing and Reuse · Laboratory Demonstrations

DARPA Reports Phoenix Satellite-Repurposing Research

DARPA:

DARPA presented laboratory progress on Phoenix, a programme exploring how robotic systems could reuse components from retired satellites to create new capabilities in orbit.

What the Update Covers

The update showed manipulation with simulated space-contact dynamics, gripping tools, autonomous control software and robotic modules. A mission animation illustrated intended applications alongside the lab work; it was not footage of satellites being repurposed in space.

Engineering Context

Reusing orbital hardware requires reliable contact, handling and assembly as well as knowledge of the target’s condition. These capabilities connect servicing and resource reuse with the wider development of in-space infrastructure.

Back to the Story List ↑

2012 News & Research

Resource Utilisation · Laboratory Research

Researchers Fabricate Lunar Regolith Simulant Parts Using a Laser

Balla et al. · Rapid Prototyping Journal:

A peer-reviewed study demonstrated direct fabrication of lunar regolith simulant parts using Laser Engineering Net Shaping, exploring how local mineral resources might support future off-Earth manufacturing.

What the Update Covers

The researchers produced dense structures under selected processing conditions and examined changes in material chemistry, phases and microstructure. This was laboratory work with simulant, not manufacturing on the Moon or processing material collected there.

Engineering Context

Turning local resources into useful parts requires more than achieving a printable shape. Feedstock variability, energy demand, cracking and the properties of the finished material must be understood before a process can support mission requirements.

Back to the Story List ↑

Space Construction · Concept Studies

NASA Selects Early Concepts for Autonomous Lunar Construction

NASA · Press Release:

NASA announced 28 selections for its Innovative Advanced Concepts programme, including a proposed system to use lunar regolith for autonomous construction of concrete structures on the Moon.

What the Update Covers

The announcement described early feasibility studies rather than flight-ready equipment. Phase I funding supported initial exploration of concepts, while Phase II awards developed promising earlier studies. NASA explicitly placed these ideas at an early stage of development.

Engineering Context

Early studies help identify the assumptions behind an ambitious construction concept. Material preparation, power, automation and verification all need to be connected to a credible mission architecture before expected benefits can be assessed.

Back to the Story List ↑

Orbital Assembly · Technology Development

Draper Outlines Satellite Component Reuse for Project Phoenix

Draper:

Draper described its work on DARPA’s Phoenix programme, which proposed recovering useful components from retired satellites and combining them with small spacecraft modules to create new space systems.

What the Update Covers

The planned architecture paired a servicing spacecraft with modules known as satlets. An antenna could be recovered from a non-working satellite, with its owner’s agreement, and attached to the modules. The announcement described development plans, not an achieved orbital recycling mission.

Engineering Context

Reusing an existing structure introduces questions about its condition, interfaces and controllability. Rendezvous, handling and assembly must be considered alongside the resulting spacecraft’s power, communications and attitude-control requirements.

Back to the Story List ↑

Orbital Logistics · Robotic Capture

Dragon Capture Demonstrates a New Orbital Logistics Interface

European Space Agency:

ESA reported the capture and berthing of the first SpaceX Dragon spacecraft to visit the International Space Station.

What the Update Covers

The operation combined spacecraft rendezvous with crew-controlled robotic handling. Dragon approached the station for capture by Canadarm2, after which the arm moved it to the Harmony module. This was a capture-and-berthing operation, rather than an automatic docking.

Engineering Context

Orbital manufacturing depends on reliable delivery interfaces for equipment, feedstock and replacement parts. Different transport vehicles impose different approach, capture and attachment procedures, which must be included when planning a production platform’s logistics.

Back to the Story List ↑

Robotic Servicing · Orbital Demonstration

Dextre Demonstrates Precise Robotic Servicing Tasks on the ISS

Canadian Space Agency:

The Canadian Space Agency reported that Dextre had completed intricate tasks for the Robotic Refueling Mission during operations on the ISS from 7–9 March 2012.

What the Update Covers

Working on a representative satellite servicing module, the robot tested tools, released launch locks and cut thin wires securing valve caps. One operation involved roughly a millimetre of clearance. These were preparatory servicing tasks; the release did not report fuel transfer or servicing of a free-flying satellite.

Engineering Context

Precise manipulation is relevant to both maintenance and assembly in orbit. Representative interfaces and staged demonstrations provide evidence about tool access, operational sequencing and the ability to control contact with spacecraft hardware.

Back to the Story List ↑

2011 News & Research

Infrastructure Reliability · Maintenance Logistics

Reliability Review Examines ISS Spares and Service-Life Planning

U.S. Government Accountability Office:

An independent GAO review assessed NASA’s plans for spare parts, structural health and continued ISS operation through 2020.

What the Update Covers

The report found the principal analytical approaches reasonable, while recommending that reliability estimates be reconsidered as operational evidence accumulated and that the rationale for availability decisions be documented. It distinguished replaceable hardware from structures whose continued service required separate assessment.

Engineering Context

On-demand manufacturing is often proposed as an alternative to carrying spares. Evaluating that claim requires realistic failure rates, repair times and consequences of unavailable equipment. This report supplies useful context for comparing resupply, replacement and future manufacturing options.

Back to the Story List ↑

Metal Additive Manufacturing · Technology Development

NASA Showcases Electron-Beam Metal Fabrication

NASA · Press Release:

NASA announced an industry forum on Electron Beam Freeform Fabrication (EBF3), a process for building metal components directly from digital designs, with potential applications in aviation and spaceflight.

What the Update Covers

The technique combines a wire feed, electron beam and positioning system inside a vacuum chamber. Metal is melted and deposited in successive layers. The release discussed the technology and its potential uses, including in reduced gravity; it did not report a completed orbital manufacturing mission.

Engineering Context

Wire-fed metal deposition is relevant to future space manufacturing, but a flight system also needs suitable power, thermal control, containment and inspection. Demonstrating deposition is one step towards qualifying a repeatable process and its finished components.

Back to the Story List ↑

Robotic Servicing · Payload Preparation

NASA Prepares the Robotic Refueling Mission for Flight

NASA · Press Release:

Ahead of the final Space Shuttle flight, NASA outlined plans to deliver the Robotic Refueling Mission module to the International Space Station and investigate robotic refuelling of existing spacecraft.

What the Update Covers

The planned experiment would use Dextre, the Canadian-built robot designed for intricate maintenance and servicing tasks. This announcement described preparations before launch, rather than completed refuelling operations. The archive’s 2012 report follows the subsequent precision servicing demonstrations.

Engineering Context

A dedicated experiment lets engineers investigate tools and procedures before applying them to an operational satellite. Such staged verification is relevant to orbital maintenance and assembly, where access, visibility and control of physical contact can constrain the task.

Back to the Story List ↑

Orbital Assembly · Installed Infrastructure

Leonardo Becomes a Permanent Addition to the ISS

ESA · Mission Image Report:

ESA documented the attachment of the Leonardo Permanent Multipurpose Module to the International Space Station, extending the station with hardware previously used to transport cargo.

What the Update Covers

Leonardo had been adapted for a permanent role, including improved debris shielding and easier crew access to internal equipment. This was assembly of a module manufactured and modified on Earth, rather than fabrication in orbit.

Engineering Context

Adapting a logistics module for long-term use illustrates how a change in mission can alter protection, maintenance and access requirements. Orbital infrastructure benefits from considering these lifecycle needs alongside launch constraints and assembly interfaces.

Back to the Story List ↑

Rendezvous and Docking · Research and Development

NASA Studies an ISS Testbed for Autonomous Rendezvous

Naasz et al. · NASA Conference Paper:

A NASA conference paper introduced the Dextre Pointing Package and its proposed autonomous rendezvous and docking instruments, supporting research into servicing existing spacecraft.

What the Update Covers

The study described sensors and avionics intended to reduce technology risks for approaching cooperative and non-cooperative vehicles. It presented a planned ISS payload, not a completed demonstration. NASA’s repository records publication in February 2011, although the document was acquired in 2018.

Engineering Context

Before robots can assemble or service free-flying hardware, they must estimate relative position and motion reliably. Sensor performance and navigation confidence therefore shape the approach strategy, operating limits and contingency procedures of a servicing mission.

Back to the Story List ↑

2010 News & Research

Orbital Infrastructure · Mission Architecture Study

NASA Assesses the Future of On-Orbit Satellite Servicing

NASA Goddard · Project Report:

NASA’s On-Orbit Satellite Servicing Study examined potential servicing capabilities, their benefits and the technologies needed to support future missions.

What the Update Covers

The report considered refuelling, refurbishment, construction of large structures and debris management. Representative mission concepts helped identify gaps in rendezvous, capture, manipulation and autonomy. These were architecture studies and development recommendations, rather than newly completed servicing missions.

Engineering Context

A servicing capability must connect an operational need to a workable mission sequence. Comparing concepts against consistent assumptions helps expose requirements, technology dependencies and cost drivers before committing to detailed development.

Back to the Story List ↑

Robotic Servicing · Operations Research

DLR Examines Servicing Missions and Ground Operations

Sellmaier, Boge and Spurmann · DLR Conference Paper:

A DLR paper presented preparations for the DEOS and OLEV on-orbit servicing missions, alongside potential applications including space debris removal.

What the Update Covers

The authors discussed approach navigation, teleoperation and ground-segment design, and described an integrated system test involving the European Proximity Operations Simulator. The paper addressed mission preparation and ground testing, not successful orbital execution of the proposed missions.

Engineering Context

Robotic operations in space depend on the supporting ground system as well as the spacecraft. Testing navigation, commands and operator interactions together can reveal constraints that isolated subsystem tests miss.

Back to the Story List ↑

Metal Additive Manufacturing · Materials Research

NASA Tests Material Properties of Electron-Beam-Fabricated Inconel

Bird and Atherton · NASA Technical Memorandum:

NASA researchers investigated an Inconel 718 block produced using Electron Beam Freeform Fabrication, measuring room-temperature tensile properties at different orientations and positions within the build.

What the Update Covers

The larger deposit allowed measurements in multiple orientations, extending earlier work with narrower specimens. This was terrestrial materials testing of an additive manufacturing process, rather than an orbital printing demonstration.

Engineering Context

The strength of a manufactured part cannot be inferred from its shape alone. Build direction and position can matter when selecting representative test specimens and establishing a reliable basis for structural design and qualification.

Back to the Story List ↑

Orbital Assembly · Installed Infrastructure

Tranquility Is Installed on the International Space Station

ESA:

ESA reported the installation of the European-built Node-3 module, Tranquility, on the ISS, adding infrastructure for life support and crew facilities.

What the Update Covers

The station’s robotic arm moved the module from the Shuttle payload bay to Node-1. After it was secured with remotely controlled bolts, spacewalking astronauts connected power and avionics cables. This was orbital assembly of Earth-manufactured hardware.

Engineering Context

Installing a large module involves more than mechanical attachment. Handling, alignment, structural connections, utilities and leak checks form an integrated sequence, illustrating the interface planning needed for larger future space structures.

Back to the Story List ↑

2009 News & Research

Orbital Assembly · Operations Research

ISS Experience Informs Future Robotic Assembly and Maintenance

Rembala and Ower · Acta Astronautica:

A research paper examined lessons from Shuttle and ISS robotic operations and how they could improve the assembly and maintenance of future space facilities.

What the Update Covers

The authors highlighted consistent robotic interfaces, health monitoring, ground control and supervised autonomy. The paper discussed ways to reduce operational overhead and redistribute tasks between astronauts and robotic systems; it did not report a new autonomous construction mission. The date shown is the journal issue period.

Engineering Context

Assembly efficiency depends on operational design as well as robot capability. Common interfaces, clear procedures and suitable monitoring can make hardware easier to install, inspect and maintain throughout its life.

Back to the Story List ↑

Metal Additive Manufacturing · Process Development

NASA Explains Layer-by-Layer Electron-Beam Metal Fabrication

NASA:

NASA described Electron Beam Freeform Fabrication (EBF3), a process that uses an electron beam to melt metal feedstock and build components in successive layers inside a vacuum chamber.

What the Update Covers

The feature explained how digital designs guide deposition and how compatible metals can be combined during fabrication. It discussed potential aerospace applications, rather than announcing production of components in orbit.

Engineering Context

Manufacturing a part directly from a digital design offers flexibility, but the process must still deliver suitable material properties and dimensional accuracy. Feedstock compatibility, energy delivery and verification are important considerations when assessing future space applications.

Back to the Story List ↑

Modular Space Systems · Control Research

Researchers Study Cooperative Control of Assembled Space Robots

Toglia et al. · IEEE Conference Paper:

Researchers investigated how robotic modules could coordinate their control after assembly, addressing the changing dynamics and shared resources of a modular space system.

What the Update Covers

The paper compared cooperative optimal control with an approach in which individual modules were not coordinated, using simulation and experimental results. It addressed control of assembled systems, not a reported orbital construction mission. The publication month follows MIT’s repository record.

Engineering Context

Joining modules changes mass distribution and can introduce redundant sensors and actuators. A viable assembly architecture therefore needs a control strategy for the combined system, alongside mechanisms for physically connecting its parts.

Back to the Story List ↑

On-Orbit Servicing · Completed Mission

Hubble’s Final Shuttle Servicing Mission Completes Its Work

ESA/Hubble:

ESA/Hubble reported the successful conclusion of Servicing Mission 4, during which astronauts installed two new scientific instruments and repaired two existing instruments across five spacewalks.

What the Update Covers

The mission installed Wide Field Camera 3 and the Cosmic Origins Spectrograph and repaired the Space Telescope Imaging Spectrograph and Advanced Camera for Surveys. The latter’s High Resolution Channel remained unavailable. This was an achieved servicing and upgrade mission, followed by testing and calibration.

Engineering Context

Hubble illustrates the value of maintaining and upgrading expensive space infrastructure. Tool access, replaceable equipment, task planning and contingency responses are practical considerations for future servicing systems, whether operated by astronauts or robots.

Back to the Story List ↑

2008 News & Research

Orbital Assembly · Laboratory Integration

Kibo Laboratory Installation Expands the ISS Research Platform

Japan Aerospace Exploration Agency:

JAXA’s flight-day report recorded installation of Kibo’s Pressurized Module on the International Space Station.

What the Update Covers

The update described the assembly milestone and the mission’s first spacewalk, establishing the laboratory’s place in the growing station. The publication date follows JAXA’s Japanese-time mission reporting. Installation prepared the way for subsequent commissioning and research activities.

Engineering Context

Large orbital facilities grow through coordinated robotic handling, astronaut tasks and staged activation. Kibo illustrates how an assembled platform can provide infrastructure for later experiments, while each new module creates its own integration and operational requirements.

Back to the Story List ↑

Metal Additive Manufacturing · Research and Development

NASA Explores Electron-Beam Fabrication for Spacecraft Support

Karen Taminger · NASA Conference Paper:

A NASA conference paper outlined Electron Beam Freeform Fabrication (EBF3), its development challenges and its potential to support lightweight structures and spacecraft maintenance.

What the Update Covers

The work discussed depositing metal into near-final shapes, adding features to forgings and reducing waste. It identified process monitoring and local thermal response as areas needing development. This was manufacturing research and technology assessment, not a report of operational production in orbit.

Engineering Context

A useful space manufacturing process must combine material performance with controllable deposition. Monitoring, heat management and inspection help determine whether a promising fabrication method can become a repeatable capability for mission hardware.

Back to the Story List ↑

Orbital Logistics · Automated Docking

Jules Verne Demonstrates Automated Docking with the ISS

ESA:

ESA’s first Automated Transfer Vehicle, Jules Verne, completed an automated docking with the International Space Station, demonstrating a European capability for delivering supplies and supporting station operations.

What the Update Covers

Onboard computers controlled the approach while ground teams and the ISS crew monitored progress. Independent safety systems and retreat options supported the operation. Docking began the vehicle’s servicing phase; cargo transfer and reboost activities were described as subsequent tasks.

Engineering Context

Reliable rendezvous and docking underpin the delivery of equipment, consumables and future manufacturing feedstock. A complete mission design must account for navigation, supervision and recovery from faults as well as the physical docking interface.

Back to the Story List ↑

Space Robotics · Installed Capability

Dextre Is Assembled and Activated on the ISS

Canadian Space Agency:

The Canadian Space Agency announced that Dextre had been installed and activated on the ISS after launch and three spacewalks to assemble the two-armed robot.

What the Update Covers

Dextre completed Canada’s Mobile Servicing System and added tools and fine-manipulation capabilities for station construction and maintenance. This release marked installation and activation, rather than the later satellite-servicing demonstrations covered elsewhere in the archive.

Engineering Context

Large positioning arms and dexterous tools perform complementary roles. Combining reach with precise manipulation can broaden the tasks a robotic system can undertake, provided hardware interfaces and operating procedures support both types of movement.

Back to the Story List ↑

Orbital Assembly · Research Infrastructure

Columbus Joins the International Space Station

ESA:

ESA reported that the Columbus laboratory had been attached to the Harmony module, adding a European research facility to the International Space Station.

What the Update Covers

Spacewalking astronauts prepared the laboratory before the station’s robotic arm lifted it into position for berthing. Hatch opening and initial activation were planned for the following day. The event demonstrated coordinated orbital assembly of a module built on Earth.

Engineering Context

Installing research infrastructure requires coordinated handling, mechanical interfaces and commissioning. Separating physical installation from activation and verification helps define clear acceptance stages for future laboratories and manufacturing facilities in space.

Back to the Story List ↑

2007 News & Research

On-Orbit Repair · Completed Operation

Astronauts Repair a Torn ISS Solar Array

ESA · Mission Image Report:

ESA documented the STS-120 repair of a damaged ISS solar array, showing how astronauts and ground teams restored its ability to deploy fully.

What the Update Covers

Scott Parazynski cut a snagged wire and installed improvised stabilisers while Doug Wheelock monitored clearance from the station truss. Ground controllers then completed deployment. The date shown is the publication date of ESA’s image report, rather than the date of the spacewalk.

Engineering Context

Unexpected damage can demand a repair approach developed around the hardware and tools available. Access, crew positioning, load paths and coordinated operations all matter when translating a repair concept into a workable task in orbit.

Back to the Story List ↑

Orbital Assembly · Installed Infrastructure

Harmony Adds Connections for Future ISS Laboratories

ESA:

ESA reported that the Italian-built Harmony module had been attached to the ISS, preparing the station for the later addition of the Columbus and Kibo laboratories.

What the Update Covers

Harmony was initially installed at a temporary location on the Unity module during the STS-120 mission. This was an assembly milestone for hardware manufactured on Earth, with further relocation and integration still to follow.

Engineering Context

A connecting module provides more than additional volume: its interfaces enable future expansion. Planning temporary configurations, handling operations and subsequent integration is an important part of assembling complex infrastructure across multiple missions.

Back to the Story List ↑

Robotic Servicing · Orbital Demonstration

Orbital Express Demonstrates Autonomous Satellite Servicing

Boeing · Mission Results Release:

Boeing reported the completion of Orbital Express, a DARPA-led demonstration of autonomous rendezvous, capture and servicing using the ASTRO and NextSat spacecraft.

What the Update Covers

The mission tested fuel and battery transfers, computer replacement and operations with the spacecraft separated. NextSat was a purpose-designed serviceable client; the results should not be read as a demonstration of servicing an arbitrary satellite without compatible interfaces.

Engineering Context

Orbital servicing brings navigation, robotics and resource transfer together in one operational sequence. Designing the client and servicer interfaces together can simplify these tasks and establish a clearer basis for verification.

Back to the Story List ↑

Manufacturing Control · Research

Control Research Addresses Space-Based Electron Beam Fabrication

Seifzer and Taminger · NASA Technical Reports Server:

A conference paper explored how path planning and electron-beam settings could be coordinated for additive manufacturing intended for space applications.

What the Update Covers

The authors discussed the difficulty of gathering process data in vacuum, including optical components becoming obscured by deposited metal vapour. Their software approach linked tool paths and beam parameters while recognising the mass, complexity and qualification costs of additional control hardware.

Engineering Context

A useful orbital production system must detect and manage process variation within practical sensing constraints. Control architecture and sensor protection therefore belong in early mission design, rather than being added after the deposition equipment is selected.

Back to the Story List ↑

Metal Additive Manufacturing · Reduced-Gravity Testing

NASA Investigates Electron-Beam Fabrication in Reduced Gravity

Taminger and Hafley · NASA Conference Presentation:

A NASA presentation examined how microgravity affects Electron Beam Freeform Fabrication, including tests aboard Johnson Space Center’s C-9 aircraft.

What the Update Covers

The work considered surface tension, cooling, wire entry into the molten pool and the spacing between the deposition equipment and the workpiece. It reported successful zero-gravity deposition tests in the aircraft environment, rather than sustained manufacturing aboard an orbiting spacecraft.

Engineering Context

Reduced-gravity trials help identify which process assumptions remain valid away from normal terrestrial conditions. Longer-duration operation, thermal behaviour and reliable process control still need consideration when developing a flight manufacturing system.

Back to the Story List ↑

2006 News & Research

Orbital Infrastructure · Systems Integration

Astronauts Reconfigure the ISS Power System

ESA:

ESA reported that Christer Fuglesang and Robert Curbeam had completed the first stage of rewiring the ISS power system, preparing it to use solar arrays installed earlier in the year.

What the Update Covers

The spacewalk reconfigured two of the station’s four power channels and relocated equipment carts to support future assembly work. The remaining channels were scheduled for a subsequent spacewalk; this report did not mark completion of the entire rewiring sequence.

Engineering Context

Installing new generating capacity is only part of an infrastructure upgrade. Power distribution, temporary shutdowns and staged verification must be planned so that existing operations can continue while new equipment is integrated.

Back to the Story List ↑

Orbital Assembly · Power Infrastructure

New ISS Solar Arrays Are Installed and Deployed

Lockheed Martin · Mission Update:

Lockheed Martin reported that a new pair of ISS solar arrays and a Solar Alpha Rotary Joint had been installed during STS-115, with the arrays deployed and generating electricity.

What the Update Covers

The release distinguished deployment from connection to the station’s operational power system, which was planned for STS-116 in December. The rotary joint would help keep the arrays oriented towards the Sun while transferring power and data across the rotating interface.

Engineering Context

Deployable power systems combine structural, electrical and control requirements. Their value to future orbital manufacturing depends on reliable deployment, pointing and distribution, alongside the ability to manage disturbances to other station activities.

Back to the Story List ↑

Robotic Assembly · Technology Development

JPL Highlights Robotics for Space Assembly and Maintenance

NASA JPL · Research Gallery:

JPL’s research gallery highlighted work on robotic assembly and maintenance in space, linked to a project exploring mobile, dexterous robots that could assist astronauts.

What the Update Covers

The accompanying project description proposed development based on the six-limbed LEMUR II platform, combining mobility, manipulation and interchangeable tools. The date shown belongs to the gallery record. This was a technology-development concept, not a report of a robot assembling structures in orbit.

Engineering Context

A robot working across a large structure must reach its worksite as well as perform the task. Locomotion, attachment points and tool interfaces therefore need to be designed together when assessing robotic maintenance and assembly architectures.

Back to the Story List ↑

Metal Additive Manufacturing · Materials and Process Research

NASA Studies Efficient Metal Deposition for Structural Parts

Taminger and Hafley · NASA Conference Paper:

NASA researchers described Electron Beam Freeform Fabrication as a method for depositing metal close to a component’s final shape, reducing the material that would otherwise be removed by machining.

What the Update Covers

The paper discussed aluminium and titanium deposits, the influence of processing conditions on microstructure, and tensile properties after heat treatment. It also considered adding features to simpler cast or forged structures. These were manufacturing research results, rather than orbital production achievements.

Engineering Context

Material savings must be assessed alongside finishing and heat-treatment requirements. A future space manufacturing process needs a complete production route, including verification that deposited material meets the intended structural requirements.

Back to the Story List ↑

Autonomous Rendezvous · Failure Investigation

DART Investigation Highlights Risks in Autonomous Rendezvous

NASA · Mishap Investigation Summary:

NASA released findings from the unsuccessful Demonstration of Autonomous Rendezvous Technology mission flown in April 2005.

What the Update Covers

The spacecraft reached its target’s vicinity but consumed excessive propellant and collided with MUBLCOM before retiring. The public investigation summary examined navigation, software development, testing and systems integration. This DART mission was an autonomous rendezvous experiment, distinct from the later asteroid-deflection mission.

Engineering Context

Safe servicing requires more than accurate nominal guidance. Integrated testing, independent checks and fault responses must address sensor disagreement and unexpected vehicle behaviour before a spacecraft approaches valuable infrastructure.

Back to the Story List ↑

2005 News & Research

On-Orbit Repair · Completed Operation

Discovery’s Crew Completes an In-Orbit Heat-Shield Repair

NASA · Archived Mission Update:

NASA’s mission update reported that Discovery and ISS crew members had removed protruding material from between thermal-protection tiles on the Shuttle’s underside.

What the Update Covers

NASA’s mission overview describes Stephen Robinson using Canadarm2 for access and removing two protruding gap fillers. This was a specific repair task, not manufacture or replacement of the heat-shield tiles. The date follows NASA’s contemporary release listing; the mission overview provides additional detail.

Engineering Context

Orbital repair depends on inspection, access and a task that can be performed with available equipment. Planning the positioning of the astronaut and robotic arm is part of the engineering solution, alongside deciding what intervention the damaged hardware actually needs.

Back to the Story List ↑

Metal Additive Manufacturing · System Development

NASA Develops a Portable System for Fabricating Metal Parts

Watson et al. · NASA Tech Brief:

A NASA Tech Brief described development of a portable electron-beam fabrication system intended to make metal components close to their final dimensions, with eventual spacecraft spare-part production among its proposed uses.

What the Update Covers

The design combined a vacuum chamber, electron-beam source, wire feed, positioning equipment and monitoring controls. Compactness, efficient resource use and suitable material properties were development objectives. The brief did not report a flight-qualified system or production of spare parts in orbit.

Engineering Context

A useful manufacturing payload requires more than a deposition mechanism. The mass and power demands of supporting equipment, access for maintenance and verification of the finished part all influence whether on-demand fabrication offers a practical mission benefit.

Back to the Story List ↑

Microgravity Research · Research Payload Launch

Foton-M2 Launches Materials and Fluid-Physics Experiments

ESA:

ESA announced the launch of Foton-M2 with a programme of 39 European experiments, including materials-science and fluid-physics investigations relevant to understanding processing in microgravity.

What the Update Covers

The payload included heat-transfer experiments and materials investigations using the Agat and Polizon furnaces. This report covered launch and the planned research programme; expected benefits for materials and industrial processes were not presented as completed experimental findings.

Engineering Context

Manufacturing in orbit depends on understanding how heat and material move when gravity-driven effects change. Dedicated experiments can supply evidence for process design, while returned samples and analysis help determine what any observed differences mean in practice.

Back to the Story List ↑

Space Robotics · Experiment Preparation

DLR Prepares ROKVISS for External Installation on the ISS

DLR:

DLR outlined preparations to install the ROKVISS robotics experiment outside the ISS, providing a platform for testing robotic components under space conditions.

What the Update Covers

The planned installation involved a compact two-joint arm, cameras, a mounting platform and dedicated communications with a ground station. The announcement preceded the scheduled spacewalk and subsequent tests, so it records preparation rather than completed operational results.

Engineering Context

Robotic assembly and servicing depend on components that work reliably in the orbital environment. A dedicated experiment allows joints, sensing and command links to be assessed before their capabilities are relied upon in a larger maintenance or construction system.

Back to the Story List ↑

2004 News & Research

Additive Manufacturing · Surface Quality

Finishing Research Examines the Quality of EBF3 Aluminium Parts

Taminger et al. · NASA Technical Reports Server:

Researchers investigated how different finishing treatments affected aluminium structures produced by electron beam freeform fabrication.

What the Update Covers

The study compared milling, wire electrical discharge machining, electron-beam glazing and bead blasting. It examined surface roughness, residual stress and microstructure. This was materials and process research on Earth; the record identifies a 2004 preprint associated with that year’s Solid Freeform Fabrication Symposium.

Engineering Context

Printing a shape does not necessarily produce a service-ready component. An in-space manufacturing architecture may also need finishing, inspection and ways to manage the material removed or redistributed during those operations.

Back to the Story List ↑

Orbital Robotics · Experiment Launch

ROKVISS Launches Towards an Orbital Robotics Test

DLR:

DLR reported the launch of the ROKVISS robotics experiment aboard Progress M-51, carrying a compact two-joint robot arm towards the International Space Station.

What the Update Covers

The hardware included a metal finger and two cameras. Following final ground tests, it was intended for installation outside the ISS in January 2005, with experiments to follow. This report marks the launch stage rather than completed orbital testing; its publication date is retained here.

Engineering Context

Qualifying robotic joints, sensors and remote operation in the space environment is an enabling step towards more capable assembly and servicing systems. A small experimental mechanism can address component-level questions before those technologies are incorporated into a larger operational robot.

Back to the Story List ↑

Space Manufacturing · Planetary Research Concept

A Manufacturing Concept Proposes Building Capacity from Martian Resources

Gregory A. Dorais · NASA Ames:

A NASA Ames conference abstract proposed starting Martian manufacturing with a small system that could use local regolith to produce structural components and spare parts.

What the Update Covers

The concept combined casting and solid freeform fabrication with melting, foaming and sintering of local material. Complex components, including electronics, would still arrive from Earth. Newly manufactured parts would help build additional production equipment. This was a proposed surface-manufacturing strategy, not an orbital demonstration or a deployed Mars factory.

Engineering Context

The study connects manufacturing processes with the wider question of how infrastructure grows. For space manufacturing architectures, the useful comparison is the balance between locally produced mass, imported specialist components and the equipment needed to expand production capacity.

Back to the Story List ↑

Orbital Logistics · Hardware Integration

ATV Docking and Refuelling Control Hardware Receives Delivery Approval

European Space Agency:

ESA reported approval to deliver the Russian Equipment Control System for integration into the first Automated Transfer Vehicle, Jules Verne.

What the Update Covers

The system was designed to control the vehicle’s Russian docking mechanisms, support refuelling while attached to the ISS and participate in undocking. Delivery to Europe was a hardware integration milestone. It did not mean the vehicle had docked or transferred propellant in orbit; the later docking milestone appears in the 2008 archive.

Engineering Context

Assembly and manufacturing infrastructure depends on reliable logistics as well as production machinery. Docking interfaces, fluid-transfer equipment and control electronics must work together across the full sequence of approach, attachment, servicing and departure, with responsibilities agreed between the participating engineering teams.

Back to the Story List ↑

Spacecraft Servicing · Feasibility Investigation

NASA Investigates Robotic Options for Extending Hubble’s Life

NASA Hubble Mission Team:

NASA described work to assess whether a robotic mission could extend Hubble’s useful life and support its eventual controlled disposal following the cancellation of the planned Shuttle servicing flight.

What the Update Covers

Engineers considered attaching a propulsion system and investigated possible interventions involving batteries, gyroscopes and instruments. The article emphasised the difficulty of performing tasks on hardware originally designed for astronaut servicing. These were options under investigation in 2004, rather than a completed robotic repair mission.

Engineering Context

The study illustrates how the original maintenance concept shapes future servicing choices. Access to fasteners, latches and equipment interfaces can determine whether a task is practical for a robot. Mission feasibility therefore depends on the target spacecraft’s design as well as the capabilities of the servicing vehicle.

Back to the Story List ↑

2003 News & Research

Orbital Logistics · Ground Simulation

ATV Completes a Full Rendezvous Sequence in Simulation

European Space Agency:

ESA reported that ATV rendezvous software had successfully completed a full approach and docking sequence in a simulated environment at the programme’s French test facility.

What the Update Covers

The facility combined an electrical test model with a functional simulator, allowing engineers to exercise mission scenarios and check successive software versions. This was a ground verification milestone, not a spacecraft docking in orbit. Longer mission simulations and connections to the control centre were still planned.

Engineering Context

Assembly and servicing missions depend on reliable approach and docking before work can begin. Integrated simulation helps expose interactions between guidance, control software and operational procedures while changes are still practical, supporting the transition from individual subsystem tests to complete mission rehearsals.

Back to the Story List ↑

Cooperative Assembly · Experimental Research

Robonaut Research Explores How Humans and Robots Share Assembly Work

Rehnmark et al. · NASA Technical Reports Server:

A conference paper investigated how a human and Robonaut could divide the work in a simplified assembly task representative of activities performed during spacewalks.

What the Update Covers

The experiment compared teaming strategies to understand their strengths and weaknesses. It also developed shared control intended to combine the capabilities of a human teleoperator and robot in the presence of communication delay. This was experimental research into assisted assembly, not a report of Robonaut carrying out an orbital spacewalk.

Engineering Context

A useful assembly architecture must assign tasks as carefully as it specifies hardware. Human judgement, robotic manipulation, communication delays and handovers all influence the working sequence. Studying the team can reveal constraints that tests of the robot alone would miss.

Back to the Story List ↑

Additive Manufacturing · Process Research

Electron-Beam Research Develops a Route to Additive Metal Structures

Taminger and Hafley · NASA Langley:

NASA Langley researchers described electron beam freeform fabrication as a method for building metal features by feeding wire into a molten pool maintained by an electron beam in vacuum.

What the Update Covers

The paper reported demonstrations with aluminium and titanium alloys and discussed adding structural details to simpler cast or forged components. This was manufacturing-process research, not an in-space printing demonstration. The date follows the NASA repository’s publication record; the associated conference took place in September 2003.

Engineering Context

For future space manufacturing, this research provides a foundation for assessing feedstock, energy input and material performance. The ability to deposit metal is one part of a complete production system; positioning, inspection and any required finishing or heat treatment must also be considered.

Back to the Story List ↑

Space Robotics · Capability Assessment

A Space Robotics Survey Assesses Assembly, Inspection and Maintenance

Pedersen et al. · NASA Technical Reports Server:

A space robotics survey examined the capabilities needed for orbital assembly, inspection and maintenance, alongside mobility and exploration on planetary surfaces.

What the Update Covers

The study considered both autonomy and cooperation between humans and robots. It divided robotic capabilities into categories, proposed measures for their technical challenges and explored how different levels of development effort could affect future capability. These were research assessments and projections rather than demonstrated performance for a particular flight mission.

Engineering Context

Capability assessments help connect a mission objective to a realistic technology-development programme. For orbital manufacturing and assembly, the key question is which sensing, manipulation and operational capabilities are mature enough for the intended task, and which require further evidence before they can be relied upon.

Back to the Story List ↑

2002 News & Research

Space Habitats · Operational Lessons

Destiny’s First Year Informs Space Habitat Requirements

Rod Jones · NASA Technical Reports Server:

A conference paper reviewed how the requirements and architecture of the Destiny laboratory influenced its manufacture, testing and activation in orbit.

What the Update Covers

The study traced constraints accumulated over a long development programme and drew on the laboratory’s first year of operation. It considered how that experience could inform future habitat requirements and mission integration controls, rather than simply recording the module’s installation.

Engineering Context

Operational feedback can expose assumptions that were difficult to test before launch. For modular research facilities and orbital production platforms, requirements should evolve with evidence about integration, usability and available resources.

Back to the Story List ↑

Spacecraft Servicing · Post-Flight Materials Research

Returned Hubble Hardware Offers Evidence of Long-Term Space Exposure

European Space Agency:

ESA described the opportunity to examine Hubble’s Faint Object Camera and solar arrays after their return to Earth during the March 2002 servicing mission.

What the Update Covers

Samples were collected shortly after landing to limit changes caused by exposure to the terrestrial environment. Initial visual inspections were reported, but detailed investigations were still pending. The returned hardware offered evidence of the effects of long-duration service, including environmental damage to the arrays.

Engineering Context

Servicing can provide engineering knowledge as well as restore spacecraft capability. Examining retrieved components helps relate actual degradation to design assumptions and ground testing. That evidence can inform material selection, inspection methods and maintenance planning for future orbital structures and manufacturing equipment.

Back to the Story List ↑

In-Orbit Assembly · ISS Construction

Canadarm2 Supports Installation of the ISS Central Truss

NASA · Astronomy Picture of the Day:

NASA’s contemporary report showed Canadarm2 lifting the S0 truss from Space Shuttle Atlantis as astronauts worked to install the structure on the International Space Station.

What the Update Covers

The truss, more than 13 metres long, formed part of the station’s expanding backbone. NASA described its role in routing electricity, supporting heat management and enabling further expansion. This was assembly of hardware manufactured on Earth; the date shown is the report date during the mission, rather than a claim that all installation work finished that day.

Engineering Context

Large orbital infrastructure needs more than a structural connection. Robotic positioning, astronaut access and the routing of services must be planned together. The ISS demonstrates how successive assembly operations can create a platform whose capabilities grow beyond those of any individual launched element.

Back to the Story List ↑

Additive Manufacturing · Prototype Development

A Compact Electron-Beam Prototype Targets Future Space Manufacturing Tests

Watson et al. · NASA Technical Reports Server:

NASA researchers described a prototype using an electron beam and wire feedstock to investigate metal deposition for potential use on long-duration space missions.

What the Update Covers

The design prioritised low mass, compactness, efficient material and energy use, and safety. A low-voltage beam was intended to reduce shielding requirements, and evaluation aboard the KC-135A aircraft was planned. The paper does not report completed orbital manufacturing. Its date follows the NASA publication record; the associated symposium took place in August 2002.

Engineering Context

Turning a manufacturing process into flight equipment requires attention to the complete system. Shielding, containment, power and handling can determine whether a technically promising process fits a mission. A prototype provides a way to investigate these constraints before committing to a flight design.

Back to the Story List ↑

In-Space Manufacturing · Mission Concepts

Research Connects Freeform Fabrication with Orbital Construction and Repair

Taminger, Hafley and Dicus · NASA Langley:

A NASA research paper explored how solid freeform fabrication could support large orbital structures, spare-part production on exploration missions and automated structural repair.

What the Update Covers

The proposed applications ranged from large construction systems to compact equipment combining manufacturing, machining and welding. The authors favoured wire over powder for handling and containment in low gravity and discussed electron-beam and laser options. These were potential applications requiring development. The NASA record dates publication to January 2002, with the associated conference held in April.

Engineering Context

The paper links process selection to mission purpose: building large structures, supporting crews and repairing damage impose different requirements. It offers an early example of treating manufacturing as part of a wider spacecraft architecture, including feedstock delivery, supporting equipment and operational constraints.

Back to the Story List ↑

2001 News & Research

Space Infrastructure · Technology Assessment

Space Solar Power Assessment Highlights Assembly and Integration Challenges

National Research Council:

A National Research Council assessment examined NASA’s space solar power investment strategy, including the manufacturing, assembly and maintenance challenges of very large orbital facilities.

What the Update Covers

The report called for stronger systems integration, credible technology and cost assumptions, and clearer development plans. It identified the need to compare autonomous, remotely operated and human assembly approaches. This was an assessment of research priorities and future systems, not evidence that a commercial orbital power station had been built. The source is dated by publication year.

Engineering Context

Large space infrastructure must be assessed as a complete mission rather than a collection of promising technologies. Assembly methods influence transportation, verification, maintenance and cost. The report provides useful historical context for evaluating whether an ambitious construction concept has a credible route from research to operation.

Back to the Story List ↑

Orbital Assembly · Robotics Prototype

Skyworker Explores Mobile Robotics for Orbital Assembly

Staritz et al. · Carnegie Mellon University:

Researchers presented Skyworker, a prototype robot intended to transport large payloads and carry out assembly, inspection and maintenance on future orbital structures.

What the Update Covers

The design used an attached mobile manipulator: a robot able to move along the structure it was building and work from that structure. The paper explored a way to extend operations beyond the reach of a fixed robotic arm. It described prototype research, not a robot operating in orbit. The publication record gives May 2001.

Engineering Context

Mobility and manipulation must be designed together when constructing large facilities. Attachment points, routes across the structure and access to work areas become part of the assembly architecture. This makes the structure itself an important element of the robotic system, rather than simply its payload.

Back to the Story List ↑

Orbital Assembly · Interface Verification

Designing and Verifying an Orbital Truss Connection

Gabriel Katell · NASA Technical Reports Server:

A mechanisms paper examined the attachment system used to join the ISS P6 and Z1 trusses, concentrating on alignment, bolting and verification.

What the Update Covers

The design accommodated manufacturing tolerances and thermal displacement during berthing. Its verification combined analysis with structural, vibration, misalignment, underwater and full-scale functional tests. The paper follows the December 2000 assembly operation; the linked record provides an abstract but no downloadable paper.

Engineering Context

Reliable assembly depends on interfaces that tolerate imperfect alignment and remain operable across temperature changes. Backup features and accessible verification steps matter alongside the nominal attachment sequence.

Back to the Story List ↑

Orbital Robotics · Launch Milestone

Canadarm2 Launches with Equipment for the Growing ISS

European Space Agency:

ESA reported the launch of Endeavour on STS-100, carrying Canada’s new robotic arm and the Raffaello logistics module towards the International Space Station.

What the Update Covers

The payloads supported the station’s continuing construction and research preparations. Raffaello carried laboratory equipment and supplies, while the robotic arm was intended for station operations and assembly. This contemporary article records the launch; docking, installation and checkout were still ahead at the time of publication.

Engineering Context

An orbital construction programme needs both handling capability and a supply chain. Delivering a robotic arm alongside laboratory equipment illustrates the relationship between assembly infrastructure and the useful facilities it helps establish. Launch success is an important milestone, followed by integration and verification before operational use.

Back to the Story List ↑

In-Orbit Assembly · Laboratory Integration

Destiny Adds Laboratory and Control Capability to the ISS

European Space Agency:

ESA described the addition of the Destiny laboratory during STS-98, expanding the International Space Station’s research accommodation and command-and-control capability.

What the Update Covers

The report connected the module’s arrival with carefully planned assembly work and spacewalks. Destiny also supplied navigation electronics that enabled the station’s control moment gyroscopes to be brought into use. The update shows how integrating a new module can change the operation of the wider station, as well as add internal space.

Engineering Context

Modular construction depends on compatible mechanical, electrical and operational interfaces. A laboratory must become part of the station’s supporting systems before it can deliver research value. This is relevant to future manufacturing modules, where installation, utility connections and commissioning are as important as the production equipment inside.

Back to the Story List ↑

2000 News & Research

In-Orbit Assembly · Solar Array Deployment

New Solar Wings Expand the International Space Station’s Power Infrastructure

European Space Agency:

ESA reported that new solar arrays delivered by Endeavour had been installed on the International Space Station, providing a major expansion of its power infrastructure.

What the Update Covers

The report described deployment of the two wings on successive days. An apparent slackness in a blanket on the first wing prompted closer examination before the second was extended. The arrays were installed, while the article described their full power contribution as still to come once operational.

Engineering Context

Orbital construction involves deployment and inspection as well as attachment. Flexible structures can behave differently from rigid modules, making staged operations and opportunities to investigate anomalies valuable. Power infrastructure also enables later additions to the station, linking each assembly milestone to the facilities that can follow.

Back to the Story List ↑

Space Infrastructure · Systems Architecture

ISS Baseline Study Connects Infrastructure with Future Growth

NASA · ISS Evolution Data Book:

NASA’s baseline design volume brought together the station systems and resources that future ISS developments would need to work within.

What the Update Covers

The report covers facilities for internal and external payloads, crew availability, power and thermal margins, storage and vehicle traffic. It provides a contemporary design reference for understanding the platform that later hosted manufacturing and robotics experiments.

Engineering Context

An orbital factory needs utilities, transport and maintenance as well as production equipment. This reference helps frame expansion as a systems problem: each new capability consumes resources and changes operational demands.

Back to the Story List ↑

Modular Space Infrastructure · Completed Docking

Zvezda Docking Prepares the ISS for a New Control Configuration

European Space Agency:

ESA announced the successful docking of the existing two-element International Space Station with the Zvezda service module, creating a three-element orbital complex.

What the Update Covers

The newly arrived module carried a European-supplied Data Management System. Checks of the attachment mechanisms and seals were to follow, before connections and a planned handover of station control. The release therefore records completed docking, with verification and control-system integration still ahead.

Engineering Context

Joining modules changes both the physical structure and the way a spacecraft is operated. Mechanical attachment, leak checks, data connections and authority to control the combined vehicle need a coordinated sequence. Future orbital factories and assembly platforms will face similar integration questions as they grow through separately launched modules.

Back to the Story List ↑

Aerospace Manufacturing · Materials Research

Freeform Fabrication Research Targets Reinforced Ceramic Propulsion Components

Vaidyanathan et al. · NASA Technical Reports Server:

A research abstract described development of a solid freeform fabrication approach for ceramic composite propulsion components reinforced with continuous carbon fibres.

What the Update Covers

The work addressed demanding combinations of heat resistance, mechanical performance, durability and production cost. It concerned aerospace component manufacturing on Earth, not fabrication in orbit. The date follows the NASA record for the 2000 abstract; a later proceedings paper with the same title was published in 2001.

Engineering Context

Manufacturing capability must be judged against the material properties required in service, rather than shape alone. Although this work concerns propulsion components, the same principle applies to space manufacturing: process selection must account for reinforcement, defects, environmental exposure and how the finished component will be qualified.

Back to the Story List ↑

Aerospace Structures · Manufacturing and Inspection

NASA Links Composite Manufacturing with Inspection Requirements

Ann Whitaker · NASA Marshall:

A NASA symposium abstract examined manufacturing and nondestructive evaluation of large composite aerospace structures for proposed launch systems and components.

What the Update Covers

The discussion connected new fabrication methods with requirements such as cryogenic-fluid containment, chemical compatibility and high-temperature service. It described proposed and developing manufacturing approaches rather than completed orbital production. The NASA record dates the abstract to January 2000 and lists the associated research symposium in March.

Engineering Context

Inspection is part of establishing a usable manufacturing process. Changes in materials or construction methods can introduce different defects and demand different verification techniques. For future in-space production, planning how to assess the finished structure is therefore as important as planning how to make it.

Back to the Story List ↑

From News to Research

Explore the literature and mission-planning questions behind on-orbit manufacturing.

Browse the Research Library ↗